Stone veneer in Conroe and the Greater Houston area by Palacios Construction Group
Manufactured & Natural Stone | Installed Over a Real Moisture Barrier | Since 1985

Stone Veneer Installation in Conroe and the Greater Houston Area

Manufactured & Natural Stone | Installed Over a Real Moisture Barrier | Since 1985

Family-Owned & Operated Since 1985 Moisture Barrier Done Right Manufactured & Natural Stone Google 5.0 Rated Fully Insured 1-Year Workmanship Warranty
Part of our Siding & Exterior services →

Few upgrades change the face of a home like stone. A stone veneer wainscot across the front, wrapped columns, a full stone elevation, or a stone accent on an outdoor fireplace gives a house weight and character that paint and siding cannot match. Manufactured stone makes that look attainable for almost any home, and natural stone brings it to the next level. Either way, stone veneer is one of the highest-impact exterior projects you can do, and it is also one of the easiest to get wrong. The difference between a stone wall that lasts and one that fails is almost entirely in the parts you cannot see.

The single most important part of a stone veneer job is the part that never shows: the wall system behind the stone. Adhered stone veneer must be installed over a proper moisture barrier and drainage plane, with the right lath, scratch coat, and weep screed, so that any water that gets behind the stone can drain back out. When installers skip that system and slap stone onto bare sheathing or an incomplete barrier, water gets trapped, leading to rot and mold hidden behind a beautiful wall. We build the wall system correctly first because that is what makes stone veneer last for decades rather than fail quietly behind the facade. A wall that looks flawless can be rotting underneath, and by the time it shows, the repair means tearing the stone back off.

We are a family company that has been building in Texas since 1985, and our owner, Joel Palacios, is on every project. You get one crew accountable for the whole assembly, from the moisture barrier to the last stone and the finished mortar joints, honest guidance on manufactured versus natural stone, and an installation built to keep water where it belongs. A good-looking wall that traps water is the worst result in this trade, so the drainage plane gets the extra day it needs.

Family-Owned & Operated Since 1985 Moisture Barrier Done Right Manufactured & Natural Stone Google 5.0 Rated Fully Insured 1-Year Workmanship Warranty
Stone veneer project in Conroe, TX by Palacios Construction Group
What Makes Stone Veneer Last

What Makes Stone Veneer Last Instead of Fail

Stone veneer is beautiful when it is right and a hidden disaster when it is wrong. Three things decide which one you get, and only one of them is the stone itself.

01

The moisture barrier and drainage plane

This is where stone veneer jobs succeed or fail. Adhered stone is not waterproof, so some water will always find its way behind it, and the wall has to be built to let that water drain back out. That means a proper weather-resistive barrier, often two layers, correct lath, a scratch coat, and a weep screed at the bottom so water can escape. Skip any of it and water gets trapped against the sheathing, which rots and molds behind a wall that looks perfect. We build this system correctly before a single stone goes up, because it is the whole difference between stone that lasts and stone that destroys the wall behind it. Getting that assembly right is the single most valuable thing we bring to a stone job.

02

A sound, prepared wall

Stone is heavy, and it has to go over a wall that is sound and properly prepared to carry and bond to it. We confirm the substrate, repair any damaged sheathing, and install the barrier and lath so the scratch coat and stone have a solid, correct surface to bond to. Rushing the prep is how stone starts to loosen, crack at the joints, or pull away over time, so we treat the preparation as seriously as the stonework itself. Heavy material on a weak or wet wall is a problem no amount of beautiful stonework can fix.

03

Craft in the stone and the joints

Once the wall is right, the look comes down to craft: how the stones are blended so colors and sizes distribute naturally, how tight and consistent the joints are, and how the edges and corners are finished. Good stonework looks like it was built, not glued to a wall in a grid. We take the time to blend from multiple boxes, keep the joints clean, and detail the corners and terminations so the finished wall reads as real, lasting masonry. Rushing the blend or the joints is what makes a wall look like a grid of glued rocks instead of stone.

Built on experience
Stone veneer specialists
Engineered to last
Quality you can count on
Family owned
Local, honest, accountable
Work you can rely on
Strong today. Strong tomorrow.
Stone Veneer Work We Do

The Stone Work We Handle

We install stone veneer as accents and full elevations, always over a properly built wall system, scoped to the look you are after.

Stone veneer project in Conroe, TX by Palacios Construction Group
01

Where we install stone

  • Front wainscots and accent walls
  • Wrapped columns and porch posts
  • Full stone elevations and facades
  • Exterior fireplace and outdoor-kitchen accents
  • Entry and address-feature surrounds
02

The wall system

  • Weather-resistive barrier and drainage plane
  • Lath, scratch coat, and weep screed
  • Substrate repair before stone
  • Proper flashing at transitions
03

Material and finish

  • Manufactured and natural stone options
  • Color and profile blending
  • Mortar-joint and dry-stack styles
  • Clean corners, edges, and terminations
Stone veneer project in Conroe, TX by Palacios Construction Group
Our Process, Start to Finish

How We Install Your Stone Veneer

A lasting stone job is built from the wall out, so our process spends real time on the assembly before the stone ever appears.

01

1. Design and estimate

We start by looking at your home and the look you want, whether that is a front wainscot, wrapped columns, or a full elevation, and we talk through manufactured versus natural stone. This free visit gives you an honest estimate and a clear idea of the finished look before you commit. There is no obligation, and we will tell you honestly whether manufactured or natural stone is the better fit for your goals.

02

2. Substrate and barrier

We confirm the wall is sound, repair any damaged sheathing, and install the weather-resistive barrier, lath, and weep screed. This drainage system is the foundation of the whole job, and it is exactly the step that gets skipped on installs that fail, so we never rush it. This is the step that decides whether the whole job lasts, so it gets our full attention.

03

3. Scratch coat and layout

We apply the scratch coat that the stone bonds to and plan the layout, blending stone from multiple boxes so the colors and sizes distribute naturally across the wall. Good layout up front is what keeps the finished wall from looking patterned or patchy. A few extra minutes of planning here is what makes the finished wall look natural for its whole life.

04

4. Setting the stone and joints

We set the stone, work the mortar joints in the style you chose, and detail the corners, edges, and terminations cleanly. Joel remains your point of contact, so the barrier, the stonework, and the finish are handled by a single accountable crew rather than passed between trades. One crew that owns the barrier, the scratch coat, and the stone is what keeps the assembly consistent from the wall out.

05

5. Cleanup and final walk

We clean the stone and the site, and walk the finished wall with you, checking the blend, joints, and terminations. Our workmanship is backed by a 1-year warranty on installation and labor, and if anything needs attention in that first year, we take care of it. Stone built on a proper wall system should give you decades of curb appeal with essentially no upkeep.

Pricing

How Stone Veneer Is Priced

Stone veneer ranges from a small accent to a full elevation, so we price each project from the scope, the stone, and the wall it goes on rather than from a chart. A front wainscot on a sound wall is a very different job from a full facade or a wall that needs substrate repair before the barrier can go up.

The cost drivers are the area of stone, whether you choose manufactured or natural stone, the complexity of the corners and features, and the condition of the wall behind it. Natural stone, intricate columns and arches, and any needed substrate repair all add to the number, while a straightforward accent on a sound wall costs less. We assess it and lay the estimate out so the wall-system work is never a hidden surprise.

The estimate is free. We work on a deposit and progress draws tied to the stages of the job, and we walk you through every number before we begin, so you know what stone is and what the wall system underneath it is. We show you the true cost, including the wall system, because a number that omits the part that makes it last is not really a quote.

In Practice

Stone We Have Installed

Stone changes a home the day it goes up; whether it lasts depends on the wall nobody sees. A few projects that were built to last:

A front wainscot that transformed the curb

A home in The Woodlands had a flat, plain front elevation. We added a manufactured-stone wainscot across the front and wrapped the porch columns, over a full moisture barrier and weep screed, blending the stone from several boxes for a natural look. The house went from forgettable to the best-looking one on the block, with a wall built to shed water for the long haul.

A full elevation in natural stone

On a Magnolia property, the owners wanted natural stone to run across a full elevation. We built the drainage plane and lath, set the natural stone with clean, consistent joints, and detailed the corners so nothing read as a veneer edge. The result has the weight and character only real stone gives, on a wall built to carry and protect it.

An outdoor fireplace accent

A family near Conroe wanted their outdoor living area anchored by a stone fireplace. We faced it in stone that tied to the home, with proper flashing and clean terminations, so it looks like a built masonry feature rather than a stone-covered box.

Local Conditions that Shape the Work

Stone Veneer in the Lake Conroe Climate

Our climate is exactly why the wall system behind stone matters so much here, and it shapes how we build it.

Heavy rain and wind-driven water

Our storms push water at walls from every angle, and some of it will always get behind adhered stone. That is precisely why the drainage plane and weep screed are non-negotiable here, because a wall that cannot drain traps that water against the sheathing.

Humidity and Trapped Moisture

The humidity in this area means trapped moisture behind stone does not dry out; it rots. A stone wall built without the proper barrier can hide serious damage for years in our climate, which is the failure we build every job to prevent.

Expansive clay and movement

Local ground is expansive clay that shifts with moisture, and that movement can crack a rigid stone wall that was not detailed for it. We install over a properly prepared, sound substrate so the assembly withstands the small movements our soil produces.

Curb-appeal expectations

Stone is one of the most requested upgrades in the area's neighborhoods because it reads as quality from the street. A stone wainscot or columns can lift a plain elevation into the range of the nicest homes nearby, which is a big part of why owners here choose it.

Outdoor living and fireplaces

The outdoor-living culture around Lake Conroe means a lot of stone is used on fireplaces, kitchens, and accent walls in the backyard. We tie those features to the home and flash them properly, so they look built-in and shed water.

Deed restrictions on materials

Many HOAs govern which exterior materials and stone colors are allowed. We read your covenants before you pick a stone, so the finished elevation is approved rather than a problem later.

Sun and color selection

Our intense sun changes how stone color reads on a wall from morning to evening. We help you choose and blend colors that look right in our light, so the finished elevation looks intentional morning and evening.

The Expertise Behind the Work

What Goes Into Stone Veneer Done Right

The craft people admire in a stone wall sits on top of a wall system almost no one sees. These are the details that decide whether it lasts.

Building the drainage plane

We install the weather-resistive barrier, lath, and weep screed so water that gets behind the stone drains back out. This assembly is the single most important part of the job and the one cheap installs skip, so we build it right every time.

Preparing the substrate

We confirm the wall is sound and repair damaged sheathing before anything goes up, because stone is heavy and unforgiving of a weak or wet substrate. Good prep is what keeps the stone bonded and the joints from cracking.

Flashing the transitions

We flash where the stone meets windows, doors, rooflines, and the ground, because those transitions are where water tries hardest to get in. Proper flashing and terminations are what keep the wall dry at its edges.

Blending for a natural look

We pull stone from multiple boxes and lay it out so color and size distribute naturally across the wall. Blending is the difference between a wall that looks like real masonry and one that looks patterned or patchy.

Working the mortar joints

We work the joints in the style you chose, whether tight mortar joints or a dry-stack look, keeping them clean and consistent. The joints are as much of the finished look as the stones themselves.

Detailing corners and edges

We use corner pieces and careful cuts so the wall never shows a flat veneer edge. Clean corners and terminations are what make a veneer read as solid stone rather than a facing.

Choosing manufactured or natural

We help you weigh manufactured stone against natural, based on your look, your budget, and the wall. Both work well installed correctly, and we are honest about the trade-offs of each for your project.

Customer Reviews

Google 5.0 Rated by Homeowners Across the Lake Conroe Area

Our reputation is built on real homeowners, repeat clients, and local HOAs. Reviews below pull live from our Google Business Profile, so what you see is always current.

5.0★★★★★Google
Rating
Leave Us a Google Review
Stone Veneer FAQs

Your Stone Veneer Questions, Answered

Stone veneer project in Conroe, TX by Palacios Construction Group
Ready to Give Your Home Real Presence?
Let's Add Stone That Lasts

Stone can transform the face of your home, but only when it is built on a wall system that keeps water where it belongs. If you want the character of stone done right, we build it from the barrier out.

Hours of Operation

Monday through Friday: 7:00 AM to 7:00 PM
Saturday: 9:00 AM to 5:00 PM
Sunday: Closed

Service Area

Based in Willis and serving Montgomery County and the greater Houston area, including Conroe, The Woodlands, Montgomery, Magnolia, Spring, Tomball, Panorama Village, New Waverly, Pinehurst, Porter, Splendora, Huntsville, Cypress, and Houston.

Call Joel directly, or request a free estimate, and let's talk through the look you want and the wall it will live on.

HoursMon – Sat 7:00 AM – 7:00 PM · Sun Closed
Sun closed
Office11159 North Lake Mist Lane,
Willis, TX
Request Your Estimate

Tell Us About Your Project

Fill out the form and Joel will follow up personally to schedule your free on-site estimate.

Stone veneer project in Conroe, TX by Palacios Construction Group

Build It Right.
Build It With Trust.

From concept to completion, we're here to bring your vision to life with quality and care.

Local & Reliable

Proudly serving Montgomery County & surrounding areas.

Licensed & Insured

Your project is in safe, professional hands.

Quality Workmanship

Built to last with attention to every detail.

On-Time & On-Budget

We value your time and investment.

500+
Projects Completed
5-Star
Client Satisfaction
Montgomery
County & Beyond